Copley Controls Xenus Plus Series - F.3: Heatsink Kits

Xenus Plus User Guide 16-01344 Rev 06
Copley Controls 164
CANopen Connector Kit (XPL/XP2)
Model
Qty
Ref
Description
XPL-NK
1
J7
Sub-D 9-position female to RJ-45 adapter
1
J7
CAN bus Network Cable, 10 ft (3 m)
1
CAN bus RJ-45 Network Terminator
Individual Cable Assemblies (and Related Accessories)
Model
Ref
Description
SER-CK
J6
RS-232 Serial Cable Kit (for connecting PC to drive)
XPL-CV
J7
Sub-D 9-position female to RJ-45 adapter for XPL (PC to CANopen cable adapter)
XPL-NC-10
J7
CAN bus Network Cable for XPL, 10 ft (3 m)
XPL-NC-01
CAN bus Network Cable for XPL, 1 ft (0.3 m)
XPL-NT
CAN bus Network Terminator for XPL
XEL-NC-10
J7
EtherCAT Network Cable for XEL, 10 ft (3 m)
XEL-NC-01
EtherCAT Network Cable for XEL, 1 ft (0.3 m)
XP2-NC-10
J8
CANopen® network cable for XP2, 10 ft (3 m)
XP2-NC-01
CANopen® network cable for XP2, 1 ft (0.3 m)
XP2-NC-10
J8
CANopen® network cable for XP2, 10 ft (3 m)
XP2-NC-01
CANopen® network cable for XP2, 1 ft (0.3 m)
F.3: Heatsink Kits
The heatsink kits for XEL, XPL, XML and the “-N” XE2/XP2/XM2 models are optional and provide
cooling when required by the installation.
XEL/XPL/XML, Low Profile
Model
Qty
Description
XEL-HL
XPL-HL
XML-HL
1
Heatsink, low-profile
1
Heatsink thermal material
1
Heatsink hardware mounting kit
XEL/XPL/XML, Standard
Model
Qty
Description
XEL-HS
XPL-HS
XML-HS
1
Heatsink, standard
1
Heatsink thermal material
1
Heatsink hardware mounting kit
XE2/XP2/XM2, “-N” and 800-1887 Models
Model
Qty
Description
XE2-HS
XP2-HS
XM2-HS
1
Heatsink, standard
1
Heatsink thermal material
1
Heatsink hardware mounting kit
These kits contain the parts needed for field installation of a heatsink.