Copley Controls Xenus Plus Series - Page 92

Xenus Plus User Guide 16-01344 Rev 06
Copley Controls 92
4.3.2: (J3, J4) XE2/XP2/XM2/800-1818/800-1819/800-1887
Mating Connector
Description
Euro-style, 4 position, 5.08 mm pluggable female terminal block
Manufacturer PN
Wago: 231-304/107-000
Wire Size
22 - 12 AWG
Recommended Wire
12 AWG, 600 V
Shielded cable required for CE compliance
Wire Insertion/Extraction Tool
Wago: 231-131 or 231-291
Standard connector and tool are included in Connector Kits XE2-CK, XM2-CK, and XP2-CK.
Pin Description
Pin
Signal
Function
1
Ground
Motor frame ground and cable shield
2
W
Phase W output of drive
3
V
Phase V output of drive (use for DC motor connection)
4
U
Phase U output of drive (use for DC motor connection)
Brushless Motor Wiring Diagram
Brush Motor Wiring Diagram