Cornelius ABS 2.0 - Page 42

ABS 2.0 Operator’s Manual
Publication Number: 621058590OPR - 38 - © 2019, Cornelius Inc.
6.
Re-assemble the agitator into the hopper and
t
ighten the agitator retainer.
Figure 75.
7.
Using a mechanical spray bottle filled with
sa
nitizing solution, spray the entire interior of
the ice bin, ice-chute and ice agitator assembly.
Allow to air dry.
Figure 76.
8.
Install hopper lid. The unit w
ill not run if the
hopper lid is improperly installed.
Hopper clean complete
Table 27. Hopper Cleaning (Continued)
Step Action Figure