Cornelius ABS 2.0 - Product Line Cleaning

ABS 2.0 Operator’s Manual
Publication Number: 621058590OPR - 40 - © 2019, Cornelius Inc.
PRODUCT LINE CLEANING
5.
Carefully insert ice chute cover and slide down
t
o fully engage. Make sure cover side latches
mate flush with ice chute base before sliding
down.
Figure 81.
Table 29. Product Line Cleaning
Step Action Figure
1.
Remove all of the quick disconnects from all of
t
he BIB containers
Figure 82.
2. Fill a suitable pail or bucket with soap solution
Figure 83.
3.
Submerge all of the “disconnects” (gas and
liqu
id) in the soap solution, then clean them
using a nylon bristle brush (do not use a wire
brush). Rinse with clean, potable water.
Figure 84.
Table 28. Ice Chute Cleaning
Step Action Figure