Cornelius ABS 2.0 - POS Related Issues

ABS 2.0 Operator’s Manual
Publication Number: 621058590OPR - 56 - © 2019, Cornelius Inc.
POS RELATED ISSUES
Table 37.
Message Explanation
ABS SYSTEM NOT
COMMUNIC
ATING
• Verify that the ABS 2.0 unit is enabled
in the POS Drink. Dispenser
setup.
• Verify that POS cable is connected to COM2 on the CCU.
• Verify that the POS cable is connected to the ABS
2.0 unit.
• Verify all programming is correct.
• Verify that no error messages are displayed on the ABS 2.0 unit.
• Reboot power to the CCU.
• Reboot power to the ABS 2.0 unit.
ABS UNIT WILL NOT
DISPENSE
A DRINK
WITHOUT ICE OR WITH
EXTRA ICE
• For no ice you have to check ice chute sensor or pneumatic.
• For extra ice, you must have the modify ice dispense time.
ABS UNIT IS
DISPENSING THE
WR
ONG SIZE OR
BRANDS
• Make sure that the order in which the brands and size are the same in
br
and Setup and size Setup in the Drink dispenser as it is on the ABS
2.0 System. Coca-Cola will provide the brand Position Guide for POS
programming.
• Call your POS vendor for service.
ABS IS NOT
DISPENSING ONE OR
MO
RE OF A SIZE OR
BRANDS
• Verify the brand and Size spelling is
the same in both the brand and
Size setup as it is in the Menu item Setup.
• Call your POS vendor for service.