ABS 2.0 Operator’s Manual
© 2019, Cornelius Inc. - 41 - Publication Number: 621058590OPR
4.
Attach fittings to each BIB disconnect. If the
f
ittings are not available, the fittings from empty
BIB bags can be cut from the bags and used.
These fittings open the disconnects so the
sanitizing solution can be drawn through the
disconnect.
Figure 85.
5.
Place all the BIB disconnects into the pail of
san
itizer. Flush sanitizer through every product
line. Use the selection screen to toggle flow on/
off by selecting each brand, up to 4 at one time.
Figure 86.
6.
Fill a suitable pail or bucket with
approximately
2.5gallons (9.5 liter) of water
Figure 87.
7.
Place all the BIB disconnects into the pail of
wat
er. Flush water through every product line.
Use the selection screen to toggle flow on/off by
selecting each brand, up to 4 at one time.
Figure 88.
Table 29. Product Line Cleaning (Continued)
Step Action Figure
To Next Page
Loading...
