Cornelius ABS 2.0 - Page 55

ABS 2.0 Operator’s Manual
© 2019, Cornelius Inc. - 51 - Publication Number: 621058590OPR
3.
Slide the pre-cool condenser filter up to remove
it from
the ABS. The filter is located on the front
of the chassis.
Figure 126.
4.
Using a warm solution of McD APSC solution
an
d a clean towel, clean the filter. Rinse the
filter in luke warm water and shake off any
excess water.
Figure 127.
5.
Return the pre-cool condenser filter into its
o
riginal position by sliding it down.
Figure 128.
6.
Turn the pre-cooler power switch to the on
position. This s
witch is located on the chassis
electrical box.
Figure 129.
Table 33. Condenser Filter Cleaning (Continued)
Step Action Figure