page-26 EVOLUTION COVER
FIGURE 29: BASE PLATE
13.
Remove I- Beams, C- channels, short U-
frames and both jacks located at the bottom
of the crate. Keep these components in a safe
location see Figure 30.
CAUTION
The short U-frames are nailed in; remove them by
hand to prevent any damage.
Dropping the crate could damage the cover panels.
FIGURE 30: REMOVE BEAMS, FRAMES AND JACKS
ID DESCRIPTION
A SHORT U-FRAME
B JACK
C C-CHANNEL
D I-BEAM
14.
If your cover was delivered with roller shades,
remove the cardboard cylinders from the
holes in the side panels and keep them in a
safe location.
240799 OWNER'S MANUAL REVISION 4
To Next Page
Loading...