CPS SCA Series - Device Information

123
History Record
Running Record
Fault Record
Current Error
Current Error
P1/1
Date Fault
2015/10/22 12:20:08 ArcboardErr
2015/10/22 12:20:08
2015/10/22 12:20:08
Fault0040
2015/10/22 12:20:08
2015/10/22 12:20:08
Time
Fault0040
Fault0040
Fault0040
Fault Record
P1/1
Num
Date
Fault
001 15/10/22 12:20:08
003 15/10/22 12:20:08
002 15/10/22 12:20:08
004
15/10/22 12:20:08
005 15/10/22 12:20:08
Time
Fault0040
Fault0040
Fault0040
Fault0040
ArcboardErr
Event
ON
ON
ON
ON
ON
Running Record
P1/1
Num Date
Event
001 15/10/22 12:20:08
003 15/10/22 12:20:08
002 15/10/22 12:20:08
004 15/10/22 12:20:08
006 15/10/22 12:20:08
005 15/10/22 12:20:08
Fault
Standby
Standby
Running
Fault
Checking
Time
Figure 6-19 History Menu and Submenu
3. Current Error: This log will display any faults that are currently
affecting the operation of the inverter.
4. Running Record: This log can store up to 128 running history
messages. This includes normal operating events such as the inverter
turning on, going into standby and turning off.
5. Fault Record: This log can store up to 128 fault codes.
6.5 Device Information
Press the ESC key to leave the main “operation interface” and press ENT to
access the “Main Menu.” Using the arrow keys, scroll down to the submenu
Device Information and press ENT to check the device information, as
shown in Figure 6-20.