CPS SCA Series - Installation Procedures

17
3 Installation
This chapter describes the planning and installation procedures for the
SCA25KTL-DO/US-208、SCA50KTL-DO/US-480 and SCA 60KTL-DO/US-480
3-Phase String Inverters. Please read carefully and install the products
following the step-by-step instructions.
The inverter and other main items are shipped in two separate packages,
consisting of A.) the main inverter enclosure and B.) the wirebox, mounting
bracket, user manual, and accessory kit. Before installation, please check that
the following items are included in the packages:
Table 3-1 Main Items
No.
Item
Q’ty
Note
Box
(1)
Main enclosure of
the PV inverter
1
A
(2)
Wiring box of the
PV inverter
Standard wiring
box
RSD Wiring box
1
There are two types of wiring box.
Standard wiring box:
Integrated DC fuses with every
string.
B
RSD wiring box： With RSD
function, no negative fuses.
(3)
Mounting bracket
1
Bracket upon which the PV inverter
is hung and mounted
B
(4)
Accessory kit
1
Kit contains all necessary hardware
and accessories for installation
B