CPS SCA Series - Main Menu and Operation; Measurement Data

75
6 Main Menu and Operation
LCD screen displays “default indication interface” when the inverter is in
operation mode. Press ESC in this interface to escape the default interface and
Press ENT to access the main operation interface. The main operation interface
is shown in Figure 6-1.
Main Menu
Measurement Data
History Record
Power On/Off
Device Information
Setting
Figure 6-1 Main Menu on the LCD Screen
The main menu of the LCD screen has 5 menus, “Measurement Data”,
“Setting”, “Power ON/OFF”, “History Record”, and “Device Information”. The
users may select options by moving the curser up/down with and , and
then press the ENT key to confirm the selection. The users can return to the
default indication interface by pressing the ESC key.
6.1 Measurement Data
When Measurement Data is selected in the main screen, pressing the ENT
key opens the operation information as shown in Figure 6-2. Check the
information by pressing and . Return to the previous menu by
pressing the ESC key.