CPS SCA Series - Page 82

74
E-T:0.0kWh
2015-10-22 12：00:00
E-D:0.0kWh
3
6 9 12 15 18 21 24h
15
30
45
60
kWh
Standby Addr:001
PV1:0.0V 0.0A
Figure 5-8 Normal Operation Status
12. If the inverter fails to operate normally, the “FAULT” light will illuminate
and the fault menu will be displayed. Select Current Error and press ENT
to access the current faults the inverter has recorded. This information
will show on the LCD screen as shown in the Figure 5-9.
Current Error
P1/1
Date Fault
2015/10/22 12:20:08 ArcboardErr
2015/10/22 12:20:08
2015/10/22 12:20:08 Fault0040
2015/10/22 12:20:08
2015/10/22 12:20:08
Time
Fault0040
Fault0040
Fault0040
Figure 5-9 Fault Information Interface