70
Language setting
ENGLISH
中文
Figure 5-2 Language Setting
5. Set the grid standard. From the previous menu press ESC to return to the
System Parameters menu. If the display had been previously returned to
the main menu, follow the steps in (4) to access System Parameters
again. Select System Parameters, press ENT. Scroll to Grid
Connection Rule and press ENT.
Use the arrow buttons to move up/down to the required grid standard.
Press ENT to select the required standard.
INSTRUCTION:
Check with your local utility company before selecting a grid standard.
If the inverter is operating with a wrong grid standard, the utility
company may cancel the interconnection agreement.
Placing the inverter into operation before the overall system complies
with the national rules and safety regulations of the application is not
permitted.
To Next Page
Loading...
