ASSEMBLY
Carefully remove the all components and place it carefully on a level and stable
work surface. This tool is heavy and it is recommended that you use the help of a
friend to lifting heavy components.
Remove any protective oil, grease that has been applied to the unpainted metal
surfaces. Household cleaners and spot removers should work fine here.
You will now want to apply a coat of paste wax to the table and table extensions.
Do not discard your packaging until you have carefully inspected your table saw,
identified all loose parts and have properly operated the tool.
WARNING – DO NOT lift this saw without the help of another person. Hold the saw with a firm
grip and close to your body to ensure that you or the saw does not slip while being handled.
Be as careful as possible to prevent back injury.
WARNING – If any parts are found to be damaged of missing do not being assembly or
attempt to operate this tool. Failure to do so may result in serious personal injury
To Next Page
Loading...
