Crestron DGE-100 User Manual

76 • DGE-100 and DM-DGE-200-C Product Manual — Doc. 7696D
Current User
Select the Current User tab to view and edit information for the current DGE user.
The following settings are displayed for the current user:
l
Name: The chosen username.
l
Access Level: The access level granted to the user (Administrator, Programmer, Operator,
User, or Connect).
l
Active Directory User: Reports whether the current user is (Yes) or is not (No)
authenticated through Active Directory® software.
NOTE: A user must be added to an Active Directory group before the user may be
selected as an active directory user. For more information, refer to Groups on page
80.
l
Groups: Any groups of which the current user is a member.
Select Change Current User Password to change the password for the current user. The Change
Password dialog box is displayed.
Enter the existing password in the Current Password field. Then, enter a new password in the
Password field, and reenter the password in the Confirm Password field.
Select OK to save the new password, or select Cancel to cancel the change.

Crestron DGE-100 Specifications

General

Brand	Crestron
Model	DGE-100
Category	Engine
Language	English