Crestron Mercury CCS-UC-1 User Manual

Product Manual – DOC. 7844M CCS-UC-1: Crestron Mercury Tabletop Conference System • 35
System Settings
To configure the system settings, follow this procedure:
1. Click System to display the AVF (System) screen.
2. In the Room Name field, enter the name of the room where the device is
installed.
3. In the Language field, select the local language from the drop-down list.
4. In the Time Format field, select the time format from the drop-down list (12 hour
or
24 hour).
5. In the Date Format field, select the date format from the drop-down list.
Power Settings
Configure power settings to manage the system’s power usage. To configure the power
settings, follow this procedure:
1. Select one of the following modes from the Standby drop-down list.
− Always On sets the following:
 The connected display will be on during business hours (defined in step 2).
 The system will wake up based on occupancy outside of business hours.
 The touch screen will always be on.
 Changes reported by the built-in occupancy sensor will be ignored.
− Based on Occupancy sets the following:
 The built-in occupancy sensor will be used to determine when the room is
occupied or vacant.
 When the room is occupied the system will be on.
 When the room is vacant the system will be off.
 The connected display will be on when the room is occupied and off when
the room is vacant.
 The touch screen will be on when the room is occupied and off when the
room is vacant.
 Crestron Fusion power events will be ignored.
 Connecting an active HDMI input source will turn on the room.
 Connecting to the device by an AirMedia connection will not turn on the
room.

Crestron Mercury CCS-UC-1 Specifications

General

Brand	Crestron
Model	Mercury CCS-UC-1
Category	Conference System
Language	English