Crestron Mercury CCS-UC-1 - Page 58

54 • CCS-UC-1: Crestron Mercury Tabletop Conference System Product Manual – DOC. 7844M
NOTES:
• The device will use the same certificate used for 802.1x authentication. For
details, refer to “802.1x Configuration” on page 12.
• When disabled or if no certificate is installed, AirMedia will use a built-in self-
signed certificate
Code
A code can be used to limit access to the device. The code feature can be disabled,
randomly generated, or fixed to a specific value. Select one of the following Login Code
Modes to specify how the access code is used:
• Disabled allows any user with the device’s IP address or host name to open a
client connection without entering an access code.
NOTE: If the installation will allow Microsoft® Windows® 10 devices to connect
wirelessly to AirMedia with Miracast® devices, the Disabled setting cannot be
used.
• Random sets the device to randomly generate an access code. A new code is
generated when the last connected presenter disconnects from the device. The
access code is displayed on the device’s screen when AirMedia is selected.
• Use the following code sets the device to display a user-specified, four-digit
access code. Enter a code in the
Login Code field and click Set.
To show the access code on the device’s screen when AirMedia is selected, set
Display Login Code to Enabled. To hide the login code, set Display Login Code to
Disabled.
Ethernet Adapter
Select which of the CCS-UC-1’s Ethernet port connections (LAN for the LAN port or AUX
for the AUX port) is to be used for presenting by AirMedia.
NOTE: On the CCS-UC-1-X, selecting AUX will use the TX OUT port if it is connected to a
LAN.
Connection Display Options
Select whether connection information is displayed on the connected display device as
well as what connection information is displayed.
• Set Show Connection Info to Enabled to display connection information on the
display device. Set
Show Connection Info to Disabled to hide connection
information.
• If Show Connection Info is set to Enabled, select the Connection Info Mode to
determine what connection information is presented to room visitors.
− Select IP Address to show the IP address to use for connecting to the system.