9
General information
• powerful electric and magnetic fields.
• Only use original accessories and spare parts.
• Have the instrument serviced only by the Company Service.
2.2 Overview of product
The MULTIMETER 44 it’s a multi-meter for pH, EC, DO and Chlorine measure. It can
measure and display up to three different parameters. The instrument is able to send the
information to other instruments and also able to indicate, through relays or 4-20 mA
outputs, if the measures are inside or outside of certain limits.
The
MULTIMETER 44 has a plastic enclosure highly resistant to impact, dust and water,
protection IP 65. It can be used to work outdoor and in any type of industry.
Figure 2 Instrument parts
2.2.1 Open the instrument door
Press as the arrows indicate to open the transparent frontal door, see Figure 3, Page 10.
1 Transparent door 5 Rear cover
2 Membrane keypad 6 Cable glands
3 Graphic display 7 MP-5 connector. Direct connection with RS 232 output
for data loading from the Data Logger.
4 Frontal. Remove for cable connection 8 Protector cup for MP-5 connector
To Next Page
Loading...