Crison 44 - Safety information; Electrostatic Discharge (ESD) Considerations; Electrical installation

14
Installation
Figure 4 Wall mounting
1 Completely open the transparent door and pull to
remove it
4 Four drill holes are required as indicated in Fig. 6
5 Fix the rear cover. Put the cover-screw cups
2 Unscrew the four screws of the frontal cover 6 Assemble the housing and screw the four screws
3 Remove the back cover and the four cover-screw caps 7 Mount the transparent door
1
3
5 6 7
4
2
1
180°
2
115 mm
[4.52t in]
110 mm
[4.33 in]