Page 67
was 120214 (12th of February 2014) and you tried to enter in 100214 (10th of February 2014) the panel will not save
the programmed holiday as the day has already elapsed.
TIME ZONE DAYS
TIMEZONE DAYS - P171E 1-32E
Option 1 - Sunday
Option 2 - Monday
Option 3 - Tuesday
Option 4 - Wednesday
Option 5 - Thursday
Option 6 - Friday
Option 7 - Saturday
Option 8 - Invert
The Time-zone days are the days that the time-zone will be active. You can select any combination of the days, eg
days 2,3,4,5,6 for Monday to Friday or 1&7 for Saturday & Sunday, etc. The invert function selects all times outside
those selected. There are 8 Time-zones that can be programmed.
TIME ZONE START TIME
TIMEZONE START TIME - P172E 1-32E (HHMM)
The Time-zone start time is when the time-zone begins. It would normally be set to the beginning of the day, eg if you
were automatically arming and disarming an area with a time-zone and you wanted it to disarm when the time-zone
started you would set the start time to about 0830. The start time is programmed in 24 hour format (eg 0000-2359).
If you are setting up the time-zone during the active period (eg if the time-zone goes from 0830-1700 and the current
time is 1200) you will have to wait until the next minute expires before the panel will update the time-zone status. You
can see if the time-zone is active at location P200E4E.
TIME ZONE END TIME
TIMEZONE END TIME - P173E 1-32E (HHMM)
The Time-zone end time is when the time-zone finishes. It would normally be set to the end of the day, eg if you were
automatically arming and disarming an area with a time-zone and you wanted it to arm when the time-zone ended
you would set the end time to about 1700. The Time-zone end is active at the end of the programmed minute eg if
the time-zone end time was set to 1700, the actual time that the time-zone operates will be at 17:01. The end time is
programmed in 24 hour format (eg 0000-2359)
TIME ZONE OPTIONS
TIMEZONE OPTIONS - P174E 1-32E
1 = Ignore Holidays
2 = Dormant Time Zone (see P1032E)
If option 1 is turned on for a Time-zone, that time-zone will not be disabled when a holiday occurs. Normally when a
holiday occurs all Time-zones will be disabled but if this option is turned on the Time-zone will not be affected when a
holiday is active.
If option 2 is turned ON it marks the Time-zone as dormant until woken by a user code or tag. An example is the front
door of a building is set to automatically unlock at the start of a Time-zone and lock when it ends. If the Time-zone is
set to a dormant type the door will not unlock until a valid user has accessed the building. Once the valid user has
accessed the building the door will unlock and remain unlocked until the Time-zone ends. Valid users are associated
with Dormant Time-zones at the new program location P1032E. A user assigned to a Time-zone at P1032E will start
that Dormant Time-zone once the user accesses the building.
+++++Dialler+++++
DIALLER OPTIONS
DIALLER OPTIONS - P175E 1E
Option 1 - Dialler is Enabled
Option 2 - Fax Defeat
Option 3 - Disable Telephone Line Monitoring
Option 4 - Pulse Dialling (NOTE: For DTMF 4 & 5 must be OFF)
To Next Page
Loading...
