Page 91
Armed Zone Entry Delay Beeps to Keypads
P142E 1-64E Armed Zone Entry Delay Beeps to Keypads Page 60
(Default = 1) 01-32 = Armed Zone Entry Delay will Beep Keypad #1-32
Stay Mode Entry Delay Beeps to Keypads
P143E 1-64E Stay Mode Entry Delay Beeps to Keypads Page 61
(Default = 1) 01-32 = Stay Mode Entry Delay will Beep Keypad #1-32
Armed Zone Entry Delay Times
P144E 1-64E Armed Zone Entry Delay Times - Value 0-9999 seconds Page 61
(Default Zone # 1 = 20 Seconds, Zones # 2-64 = 0)
Stay Mode Entry Delay Times
P145E 1-64E Stay Mode Entry Delay Times - Value 0-9999 seconds Page 61
(Default Zones # 1-4 = 20 Seconds, Zones # 5-64 = 0)
Zone Re-trigger Count
P146E 1-64E Zone Re-Trigger Count - Value 0-15 (Maximum number of times a zone can re-trigger Page 61
(Default = 0) during armed state. 0=Unlimited Triggers)
Zone Reports using this Area
P147E 1-64E Zone Reports using this Area - Value 0-32 Page 61
Zone Alarm Contact ID Reporting Codes
P157E 1-64E Zone Alarm Contact ID Reporting Code - (Default = 130) Page 61
Zone Near Alarm Contact ID Reporting Codes
P158E 1-64E Zone Near Alarm Contact ID Reporting Code - (Default = 138) Page 61
Zone Intrusion Verified Alarm Contact ID Reporting Codes
P159E 1-64E Zone Intrusion Verified Alarm Contact ID Reporting Code - (Default = 139) Page 61
Zone Alarm Voice Message Number
P160E 1-64E Zone Alarm Voice Message Number - Value-0-99 (Default = 1) Page 61
Away Zone Entry Delay to Outputs
P161E 1-64E Away Zone Entry Delay to Outputs Page 62
(Default = All Off) 01-32 = Armed Zone Entry Delay to output #1-32
Stay Mode Entry Delay to Outputs
P162E 1-64E Stay Mode Entry Delay Beeps to Outputs Page 62
(Default = All Off) 01-32 = Stay Mode Entry Delay to output #1-32
Sensor-Watch Timer
P163E 1-64E Sensor-Watch Timer - 0-9999 Minutes (Default = 7200 minutes [120 Hours]) Page 62
Enrolling Radio Zone Codes
P164E 1-64E Learn Radio Zone Codes Page 62
Delete a Specific Radio Zone Code
P165E 1-64E Delete a Specific Radio Zone Code Page 62
Find Radio Zone memory Location
P166E ENTER This will find the zone # of any Radio Zone code stored in the panel Page 62
.After P166E press enter to start the find process
Zone Near Alarm to Outputs
P167E 1-64E Zone Near Alarm to Outputs Page 62
(Default = All Off) 01-32 = Zone Near Alarm to output #1-32
Zone Confirmed Alarm to Outputs
P168E 1-64E Zone Confirmed Alarm to Outputs Page 63
(Default = All Off) 01-32 = Zone Confirmed Alarm to output #1-32
Program LCD KP “Zone” Name
P169E 1-64E Program LCD KP “Zone” Name Text Page 63
Access Control Door Monitor Linked to Output
P6174E 1-64E Access Control Door Monitor Linked to Output Page
(Default = All 0) 01-32 = Output #1-32 (0 = Disabled)
Access Control Options
P6175E 1-64E Access Control Options 0 = Disabled, no access monitor options Page
(Default = 0) 1 = Access Door Monitoring
2 = Access Door REX button
3 = Egress button - hold door open
4 = Global Fire Egress - hold all Access doors open
5 = Global Egress - hold all Egress doors open
To Next Page
Loading...
