CS Instruments VA 500 User Manual

^ Operation
VA 500 Bi-directional English 1.24 Seite 31 von 56
11.3.1.2 Input / change consumption counter
Setup → Sensor Setup→ Total Counter
Setup → Sensor Setup→ Total Counter → Unit button
Important!
When the counter reach 100000000 m³ the counter will be reset to zero.
In order to change, e.g. the unit, first select by
pressing key „ “ the button “Unit” and then
key “OK”.
Select with the key „ “ the correct unit and
then confirm selection by pressing 2x „OK“.
Entering / changing the consumption counter
via button „“ , select the respective position
and activate the position with the "OK"
button.
By pressing „“ the position value is
incremented by 1. Complete with "OK" and
activate next number position.
Confirm entry by pressing „OK“.
With „CLR“ the counter will be reset to zero
For changing one or both counter please
select by pressing key „ “ the
corresponding counter-button then confirm it
with key “OK”.

CS Instruments VA 500 Specifications

General

Brand	CS Instruments
Model	VA 500
Category	Accessories
Language	English