CS Instruments VA 500 User Manual

^ Operation
VA 500 Bi-directional English 1.24 Seite 32 von 56
11.3.1.3 Definition of the units for flow, velocity, temperature and pressure
Setup → Sensor Setup→ Units
To make changes to the unit for the respective
measurement value, first select by pressing
„“ the field of the „measurement value“ and
activate „it with „OK“ .
Selection of the new unit with „“
In case the quantity of units selectable are not
presentable on one page, pleas move to next
page by pressing „<<“ .
Confirm selection by pressing 2x „OK“.
Procedure for all 4 measurement variables is
analogous.

CS Instruments VA 500 Specifications

General

Brand	CS Instruments
Model	VA 500
Category	Accessories
Language	English