Cupra ATECA - Page 128

Operation
Luggage compartment
Luggage compartment shelf
Fig. 104 In the luggage compartment: removing
and fitting the shelf.
Fig. 105 In the luggage compartment: removing
and fitting the shelf.
Removing
●
Detach the cord loops
›
›
›
Fig. 104
B
from
their hooks
A
.
●
R
emo
ve the rear shelf from the side sup-
ports
›››
Fig. 105 by pulling it upwards and
then take it out.
If necessary, the rear shelf can be stored un-
der the luggage compartment double floor
›››
page 127.
Fitting
●
Insert the cover horizontally so that the
“recess” fits onto the axis of the supports
›››
Fig. 105 and press down until it engages.
●
Hook the loops
›››
Fig. 104
B
to the rear
lid.
WARNING
Animals, loose or unsecured or objects car-
ried on the rear shelf can cause serious in-
jury in case of sudden manoeuvring or
braking or in case of an accident.
●
Do not leave hard, sharp or heavy objects
or in bags on the rear shelf.
●
Never transport animals on the rear shelf.
CAUTION
●
Before closing the rear lid, ensure that
the rear shelf is correctly fitted.
●
An overloaded luggage compartment
could mean that the rear shelf is not cor-
rectly seated and it may be bent or dam-
aged.
●
If the luggag
e compartment is overloa-
ded, remove the tray.
Note
Ensure that, when placing items of clothing
on the luggage compartment cover, rear
visibility is not reduced.
126