Infotainment System
Connectivity
Data transfer
Introduction
This communication can allow data to be
re
ad and/or written.
From the menu SETTINGS > Data trans-
fer for SEAT apps, there is a checkbox to
activate/deactivate the function and a drop-
down menu called Operation via apps
which controls the level of interaction be-
tween the apps and the system.
Full Link*
Full Link technology description
The Full Link connection is made through
a USB cable.
The Full Link s
y
stem brings together technol-
ogies that allow communication between
the Infotainment System and mobile devices:
●
MirrorLink
®
●
Android Auto™
●
Apple CarPlay™
Interfaces
To access the Full Link system, press the In-
fotainment button or press the infotain-
ment button and then select the Full
Link context.
WARNING
Any applications that are not suitable or
execute incorrectly may cause damage to
the vehicle, accidents and serious injuries.
●
CUPRA recommends the use of the Apps
that SEAT provides for this vehicle.
●
To make full use of SEAT Apps, you must
activate the Settings > Data transfer
for SEAT apps option.
●
The interaction level of the Apps on the
system must be: Allow.
●
Protect the mobile terminal with its appli-
cations from improper use.
●
Never make modifications to the applica-
tions.
●
Consult the instruction manual for the
mobile terminal.
WARNING
The use of applications while driving can
distract your attention from the traffic. Dis-
tracting the driver in any way can lead to an
accident and cause injuries.
●
Always drive carefully and responsibly.
CAUTION
●
In areas where special regulations apply
or the use of mobiles forbidden, it must be
switched off at all times. The radiation pro-
duced by the mobile when switched on may
interfere with sensitive technical and medi-
cal equipment, possibly resulting in mal-
function or damage to the equipment.
●
CUPRA cannot be held liable for any
damage caused to the vehicle as a result of
the use of applications that are of poor
quality or are defective, the inadequate
programming of the applications, the insuf-
ficient coverage of the network, the loss of
data during transmission or the improper
use of mobile terminals.
Note
●
The use of Full Link technology could in-
crease the amount you pay for data.
●
CUPRA recommends having a high bat-
tery charge on the device when connected
to Full Link.
●
CUPRA recommends that to use Full Link,
the “Date and time” should be correctly
configured. Select Settings > Date and
Time.
●
SEAT apps are designed to communicate
with the vehicle and interact with it through
the Full Link connection.
●
Information about the technical require-
ments, compatible devices, adapted appli-
cations and availability can be obtained at
160
To Next Page
Loading...
