Cupra ATECA - Page 191

Operating modes
the volume of the other audio sources
›
›
›
page 155.
Information on operating an external au-
dio source connected to the AUX-IN mul-
timedia socket
Operation Effect
Selection of another au-
dio source from the Info-
tainment system.
The external audio source
continues to run in the
background.
Stopping playback on the
external audio source.
The infotainment system
remains in the AUX menu.
Remove the connector
from the AUX-IN multi-
media jack.
The infotainment system
remains in the AUX menu.
Note
●
Please read and observe the manufactur-
er's instruction manual for the external au-
dio source.
●
Interference noise may be heard if the
external audio source is powered from the
12-volt power socket of the vehicle.
Connect an external audio source via
Bluetooth
®
In the Bluetooth
®
Audio mode, audio files
that ar
e pla
ying on a device connected by
Bluetooth can be listened to on the infotain-
ment system.
Conditions
●
The Bluetooth
®
audio source must support
the A2DP Bluetooth
®
profile.
●
In the Bluetooth® Settings menu the
Bluetooth Audio (A2DP/AVRCP)
function must
be on. Select Telephone > Settings >
Bluetooth
St
arting Bluet
ooth
®
audio transfer
●
Activate Bluetooth
®
visibility on the exter-
nal Bluetooth
®
audio source.
●
In the MEDIA main menu, press the
SOURCE
function button and select
B
T audio
.
●
Press Se
arch for new device
in order to con-
nect an e
xt
ernal Bluetooth
®
audio source for
the first time
›››
page 214.
●
OR: Select a Bluetooth
®
external audio
source from the list.
●
Please refer to the instructions on the
screen of the Infotainment system and on
the Bluetooth
®
audio source regarding the
rest of the procedure.
You may need to manually start playback on
the Bluetooth
®
source.
When the Bluetooth
®
device is disconnec-
ted, the infotainment system remains in
Bluetooth
®
audio mode.
Controlling playback
The extent to which the Bluetooth
®
audio
system can be operated through the info-
tainment system depends on the connected
Bluetooth
®
device.
Note
●
Due to the large number of possible Blue-
tooth
®
audio sources, it is not possible to
guarantee fault-free operation of all de-
scribed functions.
●
Always switch off the warning and service
tones on a connected Bluetooth
®
audio
source, e.g. key tones on a mobile tele-
phone, to prevent possible interference
noise and malfunctions.
●
To play music, do not link the external
media player simultaneously to Bluetooth
®
and the USB interface of the infotainment
system, as this can cause limitations during
playback.
●
The system response time may vary, de-
pending on the connected external play-
back device.
●
If the external player is an Apple™ device,
it cannot be simultaneously connected by
USB and by Bluetooth
®
.
189