Cupra ATECA - Page 193

Operating modes
●
Pr
ess the DELETE

function button.
●
Activate the checkboxes to the right of the
files or f
older
s to be deleted.
●
If Select all
is activated, all the files and
f
older
s on the data storage device will be de-
leted.
●
Press the DELETE 
function button. The
files and f
older
s will be deleted according to
the selection made.
●
When the files have been deleted, a mes-
sage will appear.
●
Press the BACK
function button to close
the menu.
Opening st
or
ed audio and video files
●
Change to Jukebox (SSD) content.
When storing the tracks, they are stored un-
der different categories and lists according
to the information available.
The tracks saved can be checked and
opened from these lists according to differ-
ent categories.
Jukebox
●
Playlist
●
Artist
●
Album
●
Music genre
●
Title
●
Video
●
Non-playable files (an unsupported file has
been imported).
Note
●
If the Infotainment system cancels a
copying operation, check the storage space
on the internal hard drive and check the
data storage device.
●
Due to copyright laws, before any change
in ownership of the Infotainment system, all
files stored on the jukebox must be deleted.
●
There are several possible reasons why
files may be shown as inactive (grey): files
that cannot be imported (e.g. images), files
that are already stored in the Jukebox or
files that take up more space than available
in the internal memory.
Connect an external audio source via
WLAN*
WLAN allows wireless connection between
an e
xt
ernal audio source and the Infotain-
ment system.
To use this connection, the device being
connected must have an app compatible
with the UPnP (Universal Plug and Play) com-
munication protocol.
Conditions
●
Having a compatible (UPnP) app installed
on the device.
●
Having the Enable WLAN connection op-
tion active, which can be found in the wire-
less connection configuration.
●
Pairing the mobile device to the Infotain-
ment system using a password generated by
the system. Pairing must be done from the
device to be connected.
Starting the WLAN audio transfer
●
Start the UPnP app or the app for the play-
back of the WLAN audio source.
●
In the MEDIA main menu, press the
SOURCE
function button and select WLAN .
●
Please refer to the instructions on the
scr
een of the Inf
otainment system and on
the WLAN audio source regarding the rest of
the procedure.
Controlling playback
The extent to which the WLAN audio can be
controlled via the Infotainment system de-
pends on the connected WLAN device and
the app that is used.
»
191