User Guide DDOC0099-000-AH
DTS1 CSfC 12 - 23 Command Line Interface
© 2020 Curtiss-Wright Defense Solutions Revision 5.0
NOTE
See rmcctl --serv command for information on controlling Ethernet interfaces targets will be
available on.
Start all the iSCSI targets on the RMC in slot 0.
Stop all the iSCSI targets on the RMC in slot 0.
cw_dts> istarget --start -s 0
[istarget]
RMC_S0_P1_L0: iqn.2015-05.net.cwnas.iscsi:rmc0p1 is_tgt_en=1 status=OK
RMC_S0_P2_L0: iqn.2015-05.net.cwnas.iscsi:rmc0p2 is_tgt_en=1 status=OK
[!istarget] OK
cw_dts> istarget --stop -s 0
[istarget]
RMC_S0_P1_L0: iqn.2015-05.net.cwnas.iscsi:rmc0p1 is_tgt_en=0 status=OK
RMC_S0_P2_L0: iqn.2015-05.net.cwnas.iscsi:rmc0p2 is_tgt_en=0 status=OK
[!istarget] OK
To Next Page
Loading...
Need help?
General
