Curtiss-Wright DTS1 User Manual

User Guide DDOC0099-000-AH
DTS1 CSfC 10 - 1 Simple Network Management Protocol
© 2020 Curtiss-Wright Defense Solutions Revision 1.0
Simple Network Management Protocol
10.1 SNMP MIB
The DTS1 supports Simple Network Management Protocol (SNMP). The user may configure
SNMP for a Windows workstation via the Windows Control Panel. The user should consult with
their network administrator for details on configuration and utilization of the SNMP traps and other
data capture programs.
DTS1 SNMP Management Information Basis (MIB) Definitions are as follows:
CWCDS-DTS-MIB DEFINITIONS ::= BEGIN
--
-- MIB for CWCDS DTS.
--
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, enterprises,
NOTIFICATION-TYPE FROM SNMPv2-SMI
OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
;
dtsSnmp MODULE-IDENTITY
LAST-UPDATED "201206250000Z"
ORGANIZATION "www.cwcontrols.com"
CONTACT-INFO
"email: support@curtisswright.com"
DESCRIPTION
"MIB for CWCDS DTS."
REVISION "201206250000Z"
DESCRIPTION
"version 1.0"
::= { enterprises 27675 }
--
-- top level structure
--
dtsSnmpValues OBJECT IDENTIFIER ::= { dtsSnmp 1 }
dtsSnmpValuesGroup OBJECT-GROUP
OBJECTS { dtsINFO,
dtsSERV,
dtsIPCONFIG,
dtsRMCFREE,
dtsRMCCTL,
dtsRMCINFO,
dtsLEDCTRL,
dtsSENS,
dtsSYSDATE,
dtsIBIT,
dtsCMLOGIN,
dtsCMKEY }
STATUS current
DESCRIPTION
"Group of all DTS variables."
::= { dtsSnmp 4 }
--

Curtiss-Wright DTS1 Specifications

General

Brand	Curtiss-Wright
Model	DTS1
Category	Storage
Language	English