Curtiss-Wright DTS1 - Example of RMC Module Status

User Guide DDOC0099-000-AH
DTS1 CSfC 7 - 12 Operation
© 2020 Curtiss-Wright Defense Solutions Revision 4.0
Change format of partition 2 of a 100 GB RMC module with two partitions to ext4 (default).
Command:
rmcctl -p 2 -F --force
Example of RMC Module Status
NOTE
Add the force option (---force) if changing format from NTFS to ext4.
Format partitions 1 through 4 of a 100GB RMC module with four partitions to ext4 (default).
Command:
rmcctl -p all -F
Example of RMC Module Status
NOTE
Add the force option (---force) if changing format from ext4 to NTFS.
Format partitions 1 through 4 of a 100GB RMC module with four partitions to NTFS.
Command:
rmcctl -p all -F -fs NTFS
Example of RMC Module Status
7.5.5.2 Format / Mount
NOTE
NTFS format is not supported on an unpartitioned RMC module.
Format (ext4) / mount an unpartitioned 100GB RMC module.
Command:
rmcctl -F -M
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 50 GB NAS 0 na ext4 0 0 rmc0p1
RMC_S0: 1 1 1 2 50 GB NAS 0 na
ext4 0 0 rmc0p2
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 25 GB NAS 0 na
ext4 0 0 rmc0p1
RMC_S0: 1 1 1 2 25 GB NAS 0 na ext4 0 0 rmc0p2
RMC_S0: 1 1 1 3 25 GB NAS 0 na
ext4 0 0 rmc0p3
RMC_S0: 1 1 1 4 25 GB NAS 0 na ext4 0 0 rmc0p4
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 25 GB NAS 0 na
NTFS 0 0 rmc0p1
RMC_S0: 1 1 1 2 25 GB NAS 0 na NTFS 0 0 rmc0p2
RMC_S0: 1 1 1 3 25 GB NAS 0 na
NTFS 0 0 rmc0p3
RMC_S0: 1 1 1 4 25 GB NAS 0 na NTFS 0 0 rmc0p4
[!rmcctl] OK