User Guide DDOC0099-000-AH
DTS1 CSfC 12 - 35 Command Line Interface
© 2020 Curtiss-Wright Defense Solutions Revision 5.0
NOTE
RMC / partition must be formatted before mounting.
Mount partition 1 of the RMC0.
Unmount RMC/partition 1 of the RMC in slot 0.
Software encrypt RMC in slot 0.
Access S/W encrypted RMC in slot 0.
Exit from S/W encrypted RMC mode in slot 0.
Destructively overwrite S/W encryption info on RMC in slot 0.
Associate RMC slot 0 partition 1 with general NAS use.
Associate RMC slot 0 partition 1 with an iSCSI target available on all the Ethernet interfaces.
Associate RMC slot 0 partition 1 with an iSCSI target available only on Ethernet interface eth0.
Name the mount point for RMC 0 partition 1 "/rmc_shares/lancer".
Perform "wipe" operation on RMC in slot 0.
rmcctl -p 1 -M
rmcctl -s 0 -U
rmcctl -s 0 -p 1 -U
rmcctl -s 0 -C
rmcctl -s 0 -E
rmcctl -s 0 -X
rmcctl -s 0 -D
mcctl -s 0 -p 1 --serv NAS
rmcctl -s 0 -p 1 --serv iSCSI
rmcctl -s 0 -p 1 --serv iSCSI0
rmcctl -s 0 -p 1 --mntpoint lancer
rmcctl -s 0 --wipe --force
To Next Page
Loading...