User Guide DDOC0099-000-AH
DTS1 CSfC 12 - 27 Command Line Interface
© 2020 Curtiss-Wright Defense Solutions Revision 5.0
Fields
dT...........................................Elapsed time in seconds
p .............................................Pass count. Number of times the full disk has been verified.
Tx...........................................Count of transmitted (written) buffers
Rx...........................................Count of received (read) buffers
tM...........................................Cumulative Tx throughput (timed during write phase only)
rM...........................................Cumulative Rx throughput (timed during read/verify phase only)
M .............................................Cumulative total throughput (read/write combined)
Ex2.........................................Errors other than data errors
Ex...........................................Data verification errors
LgB.........................................ROUGH representation of the byte error rate exponent
Example: Disk file system check on RMC 0
Example: Disk file system check on RMC 0 partition 1
cw_dts> mbit --fsckro -s 0 --go
[mbit]
e2fsck 1.42.9 (28-Dec-2013) /dev/rmc0: clean, 11/30531584 files, 1967964/
122094592 blocks
S!mbit] OK
cw_dts> mbit --fsckro -s 0 -p 1 --go
[mbit]
e2fsck 1.42.9 (28-Dec-2013) /dev/rmc0p1: clean, 11/30531584 files, 1967964/
122094592 blocks
[!mbit] OK
To Next Page
Loading...