User Guide DDOC0099-000-AH
DTS1 CSfC 12 - 1 Command Line Interface
© 2020 Curtiss-Wright Defense Solutions Revision 5.0
Command Line Interface
The Command Line Interface (CLI) is the primary method of communicating with and configuring
the DTS1 and / or RMC module.
12.1 DTS1
amnt............................................................................................ Auto mounter/starter control utility
cmfwupdate ................................................................................... Update DTS security processor
cmkey .......................................................................................................Manage key on encryptor
cmlogin ................................................................................ Login, Logout, initialize crypto module
dhcpconfig.............................................................................................. Configure DHCP services
fdefaults ................................................................................................ Load factory default values
fupdate ............................................................... Boot into RAM disk image to perform field update
fwall ................................................................................................................. Firewall control utility
help.....................................................................Display commands available to DTS1 admin user
ibit* ............................................................................................Perform initiated built-in test (IBIT).
info* ................................................................................................. View DTS1 system information
ipconfig*.......................................................................................................Configure IP interfaces
istarget ............................................................................................... Control iSCSI target services
ledctrl* ......................................................................... Set/get duty cycle and status for DTS LEDs
log...................................................................................................................... View DTS1 log files
mbit.................................................................................Perform maintenance built-in tests (MBIT)
ntpdate ....................................................................Retrieve system time and date from ntp server
password ............................................................................ Change login password for an account
pcap....................................... Perform packet capture (PCAP) recording to capture network traffic
rtp .......................................................................... RTP video stream recording control and status.
reboot ....................................................................................................................Reboot the DTS1
sens*.....................................................................................................View DTS1 sensor readings
serv* ..................................................................................... DTS1 service control and status utility
shutdown ...................................................................................................................Halt the DTS1
sysdate* .........................................................................................Configure system time and date
12.2 RMC Module
rmcctl* ................................................................................................................. RMC control utility
rmcfree*............................................... Display file system free/used info for RMC storage devices
rmcinfo*.......................................................................View and set RMC identification information
rmcpurge................................................................................. Purge all data on the drives of RMC
* Commands with SNMP service
12.3 Commands
Refer to following paragraphs for detailed information regarding CLI commands.
To Next Page
Loading...
Need help?
General
