User Guide DDOC0099-000-AH
DTS1 CSfC 12 - 39 Command Line Interface
© 2020 Curtiss-Wright Defense Solutions Revision 5.0
12.3.24 rmcpurge
NOTE
The DTS1 has only 1 RMC slot. As a result, the -s option is always -s 0.
Description
The rmcpurge command allows the user to purge all data on a selected RMC by issuing an ATA
Security Erase or ATA Security Enhanced Erase command to the selected storage device.
Syntax
rmcpurge [-h | --help | --version]
rmcpurge [-s] [-E | -N]
Options
-h, --help............................Print help message.
--version............................Print program version.
-s, --slot...........................Slot number of the target RMC (0, A,all). For all slots, use "A" or
"all" (default).
-N, --normal........................Issue ATA Security Erase Command.
-E, --enhanced ...................Issue ATA Security Enhanced Erase Command.
Example: Enhanced erase of RMC
Line Identifier
RMC_P#.................................Reports status of purge request for RMC in slot "#"
Fields
status=<sts> .......................Summary status for the given line.
Enumerated types
<sts> ......................................Status message (OK, NA, ERR "<str>")
<str> .......................................Text string
<summary> ............................ Command status summary (OK, ERR)
Example: Normal erase of RMC in slot 1
cw_dts> rmcpurge -s A -E
[rmcpurge]
RMC_P0: status=<sts>
RMC_P1: status=<sts>
RMC_P2: status=<sts>
[!rmcpurge] <summary>
cw_dts> rmcpurge -s 1 -N
[rmcpurge]
RMC_P1: status=<sts>
[!rmcpurge] <summary>
To Next Page
Loading...
Need help?
General
