Curtiss-Wright VS-DTS1SL-F User Manual

User Guide DDOC0099-000-AH
DTS1 CSfC 7 - 9 Operation
© 2020 Curtiss-Wright Defense Solutions Revision 4.0
Assign NAS services to partitions 1 through 4 of a RMC module with four partitions.
Command:
rmcctl -p all --serv NAS
Example of RMC Module Status
7.5.3.2 Boot Services
Set one or multiple services to start on boot-up.
Command:
serv -B --[service name] 1
Where [service] is one (or more) of the following: cifs; dhcp; ftp; http; nfs; snmp; tftp; tel.
Example Command: serv -B --cifs 1 --ftp 1 --http 1 --nfs 1
Example of RMC Module Status
Set all services to start on boot-up.
Command:
serv -B -a 1
Example of RMC Module Status
7.5.3.3 Restart Services
Restart one or multiple services.
Command:
serv --[service name] 1
Where [service] is one (or more) of the following: cifs; dhcp; ftp; http; nfs; snmp; tftp; tel.
Example Command: serv --cifs 1 --ftp 1 --http 1 --nfs 1
Example of RMC Module Status
Restart all services.
Command:
serv -a 1
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 25 GB
NAS 0 na 0 na 0 rmc0p1
RMC_S0: 1 1 1 2 25 GB
NAS 0 na 0 na 0 rmc0p2
RMC_S0: 1 1 1 3 25 GB
NAS 0 na 0 na 0 rmc0p3
RMC_S0: 1 1 1 4 25 GB NAS 0 na 0 na 0 rmc0p4
[!rmcctl] OK
cw_dts> rmcctl
[serv]
BOOTCFG
cifs=1 nfs=1 ftp=1 http=1 dhcp=0 tftp=0 tel=0 snmp=0 status=ok
LIVECGFG cifs=0 nfs=0 ftp=0 http=0 dhcp=0 tftp=0 tel=0 snmp=0 status=ok
[!rmcctl] OK
cw_dts> rmcctl
[serv]
BOOTCFG cifs=1 nfs=1 ftp=1 http=1 dhcp=1 tftp=1 tel=1 snmp=1 status=ok
LIVECGFG cifs=0 nfs=0 ftp=0 http=0 dhcp=0 tftp=0 tel=0 snmp=0 status=ok
[!rmcctl] OK
cw_dts> rmcctl
[serv]
BOOTCFG cifs=1 nfs=1 ftp=1 http=1 dhcp=0 tftp=0 tel=0 snmp=0 status=ok
LIVECGFG
cifs=1 nfs=1 ftp=1 http=1 dhcp=0 tftp=0 tel=0 snmp=0 status=ok
[!rmcctl] OK

Curtiss-Wright VS-DTS1SL-F Specifications

General

Brand	Curtiss-Wright
Model	VS-DTS1SL-F
Category	Storage
Language	English