[Tips for driving backward with trailer]
If a trailer is about to go out of a cor-
rect course during driving backward,
turn the steering wheel to the direc-
tion which the trailer goes then the
trailer returns to its original course.
TRANSPORTING
1. Check the width of the cargo bed
of a transporting vehicle or trailer.
2. Set ramps to the transporting vehi-
cle rmly.
3. It is recommended to drive back-
ward onto the transporting vehicle
to drive out of it more easily later.
4. Make sure to set the shift lever to
the "L" position and the 2WD/4WD
lever in the "4WD" position.
4. When driving over an excessive-
ly concave or convex surface, ex-
cessive stress is applied to the
hitch connection. A ball-type hitch
(A) is recommended in this case.
UUVO519A
To Next Page
Loading...
