Cushman 646442 - Checking And Changing Front Axle Oil (T); Checking and Changing Front Axle Oil (T)

7
-27
MAINTENANCE
7
10. Check the oil level by performing
the step 5 in the previous page.
If the oil level is normal, install
the ller plug.
11. Wipe the gearbox and is sur-
rounding with a rag thoroughly.
12. Test drive the vehicle for 5 to 10
minutes to check for leakage.
1. Park the vehicle on level ground
and apply the parking brake rmly.
2. Stop the engine and let the engine
cooled down sufciently.
3. Raise the hood and support it with
the support rod
CHECKING AND CHANGING
FRONT AXLE OIL (T)
(1) Filler Plug
4. Clean around filler plug, then re-
move the ller plug.
5. Check that the differential case
surface is not hot. Then, check the
oil level and condition with a nger
bent slightly. If you cannot reach

You can get burnt badly by
hot oil. Make sure to work on
it after it is sufciently cooled
down.
WARNING
UUVo736A
Oil Capacity 0.2 U.S Gal. (0.9 L)
UUVo765A
(1) Funnel
UTV-EZGO-Hauler 4X4 Diesel-07.in27 27 2015-05-26 오전 9:43:20