5. After getting onto the transporting
vehicle, apply the parking brake
rmly and secure the vehicle onto
the body frame or bracket of the
transporting vehicle with chains or
belts.
6. When transporting the vehicle on
a road, set applicable decals to
keep local regulations.
7. Always keep the total height in
mind so that the vehicle top does
not hit under a bridge or the top of
a tunnel.
(1) 2WD/4WD Shift Lever
(A) 2WD (B) 4WD
The rear wheels are driven in the
2WD mode while all the wheels are
driven in the 4WD mode. Keep the
following instructions to use the 4WD
correctly:
1. It is recommended to use the 4WD
when driving on a slippery, muddy
or icy road, driving through water
or driving to load or unload the ve-
hicle to the transporting vehicle.
4WD OPERATION
UUVO520A
Make sure to secure the vehi-
cle firmly during transporta-
tion.
The canopy, windshield or oth-
er components, which can be
accidentally removed by wind
during transportation, should
be removed in advance before
transportation and transported
separately.
The above precautions should
be kept in order to avoid a se-
rious accident
during trans-
portation.
WARNING
To Next Page
Loading...
