ACC
When the key switch is turned to
the position “B”, only electrical
power outlet and brake lights can
be operated.
C
The position “C” indicates the “ON”
position.
As soon as the key switch
is turned to this position, the oil
pressure warning lamp and bat-
tery charge warning lamp comes
on (These become off after the
engine is started). The preheat
operation is automatically started.
The automatic preheat operation
is indicated by the glow plug in-
dicator. Make sure to preheat the
engine until the glow plug indica-
torgoesoff(approx.9seconds)in
cold weather.
The position “D” indicates the
“manual preheat” position, which
is not used in normal conditions.
This position is a self-return type,
so the key should be held there
while using. This position can be
used in very cold weather to pre-
heattheenginemanuallyforextra
period of time. Using this position
for more than 30 seconds con-
secutively can reduce the preheat
system’s life.
The position “E” indicates the
“Start”. In order to start the engine,
the shift lever should be in the
neutral position. As soon as the
engine is started, release the key
then the key switch is returned to
the position “C”.
The automatic preheating sys
-
tem is not activated and the pre-
heating indicator doesn’t come
on when the engine temperature
is 30
℃ or higher. In this case,
strut the engine right away with
-
out preheating.
NOTE
-
-
-
-
-
-
CAUTION
To Next Page
Loading...
