CYBEX Arc Trainer 772A User Manual

Front Access Cover
Tools Required:
• Phillips screwdriver
Remove front access cover
1. Remove screws securing front access cover using a Phillips screwdriver.
Qty.DescriptionItem
4Screw1
1Front access cover2
2. Remove access cover.
Burn hazard. Do not touch flywheel until cool.
Install front access cover
Do not over tighten screws.
1. Place front access cover in place.
Qty.DescriptionItem
4Screw1
1Front access cover2
2. Install screws using a Phillips screwdriver.
Complete Installation
Operate the unit at all levels to verify proper operation.
Page 115 of 202
Cybex 772A, 772AT Arc Trainer Part Number

CYBEX Arc Trainer 772A Specifications

General

Brand	CYBEX
Model	Arc Trainer 772A
Category	Fitness Equipment
Language	English