CYBEX Arc Trainer 772A - Page 136

Remove front access cover
1. Remove screws securing front access cover using a Phillips screwdriver.
Qty.DescriptionItem
4Screw1
1Front access cover2
2. Remove access cover.
Burn hazard. Do not touch flywheel until cool.
Remove controller cover and incline unit
1. Remove screw securing controller cover using a Phillips screwdriver.
Qty.DescriptionItem
1Cable tie1
1Incline motor cable2
1Controller cover3
1Control board4
1Screw5
2. Remove controller cover.
3. Plug power cord into power outlet.
4. Begin striding.
5. Press the Quick Start and stop striding.
6. Press the Incline + key to incline to level 20.
7. Unplug the incline motor cable from the control board.
8. Unplug power cord from power outlet.
Page 136 of 202
Cybex 772A, 772AT Arc Trainer Part Number