• Retaining ring pliers
• 3/16” Allen wrench
• Torque wrench, with 3/16" Allen wrench
• Loctite
®
#242
• Clean cloth (2)
Disconnect power source
Unplug the power cord from the power outlet.
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Remove incline motor cover
1. Remove both screws securing incline motor cover using a Phillips screwdriver.
Qty.DescriptionItem
2Screw1
1Incline motor cover2
2. Remove incline motor cover.
Page 142 of 202
Cybex 772A, 772AT Arc Trainer Part Number
To Next Page
Loading...
