CYBEX Arc Trainer 772A - Page 144

Remove front access cover
1. Remove screws securing front access cover using a Phillips screwdriver.
Qty.DescriptionItem
4Screw1
1Front access cover2
2. Remove access cover.
Burn hazard. Do not touch flywheel until cool.
Remove left linkage rod
1. Remove socket head cap screw (SHCS), flat washer, cap and spacer securing linkage rod using a
3/16” Allen wrench.
Qty.DescriptionItem
1
Screw, SHCS .250-20 x
.75
1
1Flat washer2
1Cap3
1Spacer4
1Linkage rod5
2. Lay linkage rod down on frame. Place a clean cloth in between linkage rod and frame to prevent
scratches.
Page 144 of 202
Cybex 772A, 772AT Arc Trainer Part Number