Press and hold language logo for 6 seconds to ac-
cess Screen Lock and Toolbox.
LANGUAGE ICON
1. Tap the Access Toolbox icon to display the Access to Toolbox login screen.
2.
Enter the sequence: .
3. At the main Toolbox screen, tap the OEM Diags icon, then the Error Log icon.
Error code list
DescriptionError Code
GFX Communications issue
Error 2
Upper Display Communications issue
Error 4
Membrane Fault (stuck key)
Error 6
Approaching Over-Temperature
Error 8
MCC Watchdog Triggered
Error 9
Graphics Board Watchdog Triggered
Error 12
Upper Display watchdog Triggered
Error 13
Drive Error Unknown
Error 14
Embedded A/V Device Failure
Error 15
Membrane Fault (No Membrane)
Error 16
Lower Control Board ignored shut-down
Error 17
Power Supply Irregularity - Generator power with no speed signal
Error 22
Power Supply Irregularity - Speed signal with no generator power
Error 23
Incline moving too slowly
Error 24
Incline movement feedback stopped
Error 25
Incline disabled
Error 26
Over-Temperature
Error 28
Controller Watchdog Triggered
Error 29
Lower Control Board latched on / can’t shut down
Error 35
Incline Out of Range
Error 37
Incline Timeout
Error 38
AC Incline timeout - Up
Error 45
AC Incline timeout - Down
Error 46
Page 41 of 202
Cybex 772A, 772AT Arc Trainer Part Number
To Next Page
Loading...
Need help?
General
