CYBEX Arc Trainer 772A - Page 97

4. Remove the left inner rear cover and two screws using a Phillips screwdriver.
QtyDescriptionItem
1Left inner rear cover1
2Screws2
5. Repeat steps 1 through 4 for the right side.
Install pivot covers
1. Install the left inner rear cover with two screws using a Phillips screwdriver.
QtyDescriptionItem
1Left inner rear cover1
2Screws2
2. Install the left outer rear cover with five screws using a Phillips screwdriver.
QtyDescriptionItem
1Left outer rear cover1
5Screws2
Page 97 of 202
Cybex 772A, 772AT Arc Trainer Part Number