CYBEX ATON Q User Manual

HARNESS BUCKLE
To release Buckle Tongues, rmly press the red button on the
Harness Buckle and pull the tongues out.
To fasten, insert each Tongue into Buckle, listening for an
audible CLICK. Pull on each to verify a secure connection.
Check that the Buckle functions properly and is kept free of dirt and debris.
For cleaning, see page 44.
CHEST CLIP
To separate Chest Clip, squeeze top and bottom tabs and pull
apart. To fasten, slide the two parts together until an audible CLICK
is heard.
Always position the center of the Chest Clip even with the child's armpits.
ONE HANDED HARNESS ADJUSTMENT
Loosen Harness by rmly pressing down the Harness Adjustment
Button
a
while pulling forward on both straps
b
at shoulder level.
Pull the Adjuster Strap
c
to tighten the Shoulder Straps.
17
CLICK!
CLICK!
CLICK!
c
a
b
USING THE INFANT CARRIER

CYBEX ATON Q Specifications

General

Headrest	Yes
Washing type	Machine wash
Certification	ECE R44/04
Mounting type	Seat belt
Product color	Green
Car seat group	0+ (0 - 13 kg; 0 - 18 months)
Country of origin	Germany
Belt fastening type	3-point
Placement available	Rear-facing
Maximum weight capacity	13 kg
Maximum washing temperature	30 °C
Number of headrest positions	8
Quantity	1

Weight and Dimensions

Depth	650 mm
Width	440 mm
Weight	4600 g
Height (max)	560 mm
Height (min)	390 mm