CYBEX ATON Q User Manual

WHAT IS LATCH?
LATCH is an acronym for Lower Anchors and Tethers for CHildren
and refers to a pair of xed Lower Anchors (or bars) and a Top
Tether anchor that are built into your vehicle.
The lower LATCH anchors are located in the crease, or bight,
between the vehicle seat back and seat cushion, and if not visible,
will typically be indicated by
symbols. Top tether anchors are
located in various places behind the seat. Top tethers are not
required on infant car seats like the Aton Q.
Is it safer?
LATCH typically offers an easier and more consistent installation.
However, this child restraint can be safely installed using either
LATCH or vehicle belts. Either method is safe for your child when
installed correctly.
LATCH is standard in vehicles manufactured after September 1,
2002. Refer to your vehicle Owner’s Manual
for lower LATCH
anchor positions in your vehicle.
OUTER SEATING POSITIONS
Use the lower LATCH anchors OR a vehicle seat belt to install the
child restraint in outboard seating positions (those on either side of
the center position)
NEVER use LATCH together with the vehicle belts to
install this child restraint. Using both is not approved
and may cause improper performance of the child
restraint.
24
USING LATCH
EN

CYBEX ATON Q Specifications

General

Headrest	Yes
Washing type	Machine wash
Certification	ECE R44/04
Mounting type	Seat belt
Product color	Green
Car seat group	0+ (0 - 13 kg; 0 - 18 months)
Country of origin	Germany
Belt fastening type	3-point
Placement available	Rear-facing
Maximum weight capacity	13 kg
Maximum washing temperature	30 °C
Number of headrest positions	8
Quantity	1

Weight and Dimensions

Depth	650 mm
Width	440 mm
Weight	4600 g
Height (max)	560 mm
Height (min)	390 mm