CYBEX ATON Q User Manual

HANDLE POSITIONS
The Handle has four LOCKED positions:
1. DRIVE and CARRY position
2. 1ST LOADING position
3. 2ND LOADING position
4. RESTING position
To move handle to a new position, squeeze BOTH Handle
Adjustment Buttons
a
(one on each side) while rotating handle
b .
BOTH Adjustment Buttons must be depressed at the same time in
order for the handle to move.
INTEGRATED CANOPY
Simply pull forward to extend the Aton Q Canopy. The Canopy has
four positions as shown.
To retract the Canopy, gently push it back into its original position.
18
2
3
4
1
b
a
ALWAYS have the handle locked in the DRIVE/CARRY
position while using this child restraint in a vehicle.
ALWAYS verify that the handle is LOCKED in the drive/
carry position before lifting Infant Carrier by the handle.
An unlocked handle could move unexpectedly, causing
child to fall out.
ALWAYS keep your child properly secured in the
Harness even when using the carrier outside of the
vehicle.
NEVER hang toys or other objects from handle when
using child restraint in a vehicle as they could seriously
injure a child in a sudden stop or crash.
USING THE INFANT CARRIER
EN

CYBEX ATON Q Specifications

General

Headrest	Yes
Washing type	Machine wash
Certification	ECE R44/04
Mounting type	Seat belt
Product color	Green
Car seat group	0+ (0 - 13 kg; 0 - 18 months)
Country of origin	Germany
Belt fastening type	3-point
Placement available	Rear-facing
Maximum weight capacity	13 kg
Maximum washing temperature	30 °C
Number of headrest positions	8
Quantity	1

Weight and Dimensions

Depth	650 mm
Width	440 mm
Weight	4600 g
Height (max)	560 mm
Height (min)	390 mm