CYBEX ATON Q User Manual

ALWAYS USE the L.S.P. device when the Infant Carrier
is installed in an outer seating position, either WITH OR
WITHOUT the Base.
TO EXTEND
The L.S.P. telescopes out to two positions, fully extended and
intermediate.
Pull out the L.S.P. device on the side of the Aton Q adjacent to
the vehicle door or panel listening for an audible CLICK. If the
L.S.P. device is touching the door or panel, retract the L.S.P. to
the intermediate positon by pressing the button and pushing in the
L.S.P..
TO RETRACT
Depress the button while pushing the L.S.P. back into the carrier..
43
CLICK!
ALWAYS Use an L.S.P. device on the side of the child
restraint immediately adjacent to a vehicle door or
panel.
NEVER Extend an L.S.P. device toward a passenger or
another child restraint.
NEVER lift or Carry the child restraint using the L.S.P.
devices.
USING THE LINEAR SIDE-IMPACT PROTECTION (L.S.P.)

CYBEX ATON Q Specifications

General

Headrest	Yes
Washing type	Machine wash
Certification	ECE R44/04
Mounting type	Seat belt
Product color	Green
Car seat group	0+ (0 - 13 kg; 0 - 18 months)
Country of origin	Germany
Belt fastening type	3-point
Placement available	Rear-facing
Maximum weight capacity	13 kg
Maximum washing temperature	30 °C
Number of headrest positions	8
Quantity	1

Weight and Dimensions

Depth	650 mm
Width	440 mm
Weight	4600 g
Height (max)	560 mm
Height (min)	390 mm