Cygnus M3-DIVE - Gauge Spares; Accessories

Cygnus DIVE Operating Manual
M3-DIVE-M-ENG_Iss9.docx
Page 102 of 117
Part No.
Description
001-3706
Membrane Couplant (25ml Bottle)
001-3703
Knurled Ring Assembly for 6mm ¼" S*A Probes
Gauge Spares
Part No.
Description
001-7250
Cygnus DIVE Battery
001-7251
Battery Charger for Cygnus DIVE
Battery charger and mains lead
001-4861
Silicone Grease for Battery (50g Tube)
001-7258
Replacement Battery Screw for Cygnus DIVE
001-7259
Replacement Push Button Kit for Cygnus DIVE
001-7253
Replacement Wrist Strap Kit for Cygnus DIVE
Wrist strap, pins, grub screws and Allen key
001-7257
Replacement Lanyard for Cygnus DIVE
001-7271
Cygnus DIVE Direct to Computer (USB) Link Lead
To connect a DIVE gauge to a computer’s USB port for data transfer
001-7262
Umbilical (9-way D) to PC (USB) Link Lead for CygLink
Connects surface end of Umbilical Cable (001-7260) to a computers USB
port and converts the signal from RS485 to USB. 1.8m Long
001-0426
Umbilical (9-way D) to TSR Display Unit (Lemo) Link Lead
Connects surface end of Umbilical Cable (001-7260) to a Cygnus TSR. 1.0m
Long
001-7264
Cygnus DIVE Gauge to Umbilical Splice Cable
Connects to DIVE gauge with flying lead for splice in to customers own
Umbilical Cable. 1.0m Long
Accessories
Part No.
Description
001-7220
Data Logging Feature for Cygnus DIVE
Umbilical to computer link lead. CygLink software on USB Flash Drive.
Feature Enabler on USB Flash Drive.
001-7221/4
TOPSIDE REPEATER Kit for Cygnus DIVE
Cygnus Topside Repeater display unit, Silicone sleeve, Umbilical to TSR link
lead, Cygnus DIVE to Top-Side umbilical connectors, Batteries.
001-7222/4
TOPSIDE REPEATER Kit with Video OSD for Cygnus DIVE
Cygnus Topside Repeater display unit, Silicone sleeve, umbilical to TSR link
lead, Cygnus DIVE to Top-Side umbilical connectors, Video cables, Power
Supply.